fluid in the pipeline must be consistent with the medium calibrated in the selected solenoid valve series model.
٪ 0aمتر از مایع باید پایین تر از کالیبراسیون درجه حرارت از انتخاب شده سلونوئید شیر.
٪0aThe allowable liquid viscosity of the solenoid valve is generally below 20CST٪2c and it should be indicated if it is greater than 20CST.
Working pressure difference, when the maximum pressure difference of the pipeline is less than {{0}}.04MPA, direct-acting and step-by-step direct-acting types such as ZS, 2W, ZQDF, ZCM series from Ningbo Airpack Company should be selected; when the minimum working pressure difference is greater than 0.04MPA, it can be Select the pilot-operated (differential pressure) solenoid valve; the maximum working pressure difference should be less than the maximum calibration pressure of the solenoid valve; general solenoid valves work in one direction, so pay attention to whether there is a reverse pressure difference, and if there is a check valve installed.
٪ 0aهنگامی پاکیزگی از مایع است نه بالا٪ 2c a فیلتر باید نصب شود در جلو از solenoid شیر. به طور کلی٪ 2c solenoid شیر نیاز بهتر پاکیزگی برای متوسط.
٪0aPay توجه به جریان دیافراگم و اتصال قطر٪3b the solenoid valve is generally only controlled by two switchs٪3b if conditions permit٪2c please install a bypass pipe for easy maintenance٪3b when there is water hammer٪2c it is necessary to customize the opening and closing time adjustment of the solenoid valve.
٪ 0aPay توجه به نفوذ از محیط درجه حرارت در solenoid شیر
٪ 0aمصرف برق منبع تغذیه جریان و قدرت مصرف باید انتخاب شود با توجه به به خروجی ظرفیت ٪ 2c و قدرت منبع تغذیه ولتاژ به طور کلی مجاز به در مورد ٪ c2٪ b110 درصد . It باید باشد توجه داشته باشید که VA مقدار است بالا زمانی که AC اغاز شده است.
